Pianos regularly make movers yearly list of products that are most often damaged. Grand pianos are especially troublesome. Practicing the following procedures for taking apart, padding and packing grand pianos will prevent damage, lower claims expense, and improve consumer satisfaction.
1) At least 3 individuals are required to handle a child grand piano. If the infant grand piano needs to increase or down stairs or if a complete or concert grand piano requires to be transported, a minimum of 4 individuals are required.
2) Always complete a accurate and comprehensive stock. It may be preferable or essential to use a visual inventory to adequately explain and show pre-existing damage.
3) As numerous parts are disassembled, please location all hardware in an appropriately labeled parts bag and then position the parts bag in a "Parts Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furnishings pad.
5) Disconnect the lid by getting rid of the hinge pins. Have one person wiggle the lid, holding it opposite the hinge, while a 2nd person works the pin loose. Please take care not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small cloth to help prevent damage to the wood if needed. Wrap the lid in a clean furniture pad.
6) Get rid of the prop that holds the lid open and cover it in a tidy furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Remove the pedal assembly and wrap it in a clean furniture pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please take care not to drop the braces. In addition, please be particularly cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Keep in mind: If masking tape is not available, please usage correctly labeled parts bags for this function. When reassembling at destination, please make certain to put the rods in the right order so that the pedals will work correctly.
8) Pad the piano by putting a tidy rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from flopping open while you deal with the piano. Keep in mind: Please ensure that the surface of the piano is dust-free prior to padding this page it.
9) Position a piano board and connect the straps so that it is prepared to receive the piano. The raised brace on the piano board ought to be at the keyboard end of the piano.
10) Remove the left front leg by positioning one individual beneath the piano at the left end of the keyboard. Be sure to have 2 people raising the corner of the piano while the 3rd person removes the leg. Keep in mind: Please be sure to note which legs were eliminated from which positions because some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by lowering the "leg-less" end onto the board. Please be sure to raise the whole piano somewhat while finishing this maneuver to prevent unnecessary pressure on the staying, connected legs as the piano tips. Be sure that the piano is centered comfortably against the brace at the end of the piano board.
12) Eliminate the 2 staying legs and cover them in tidy furniture pads. These legs are held in place by a "crucial and slot" plan. To remove the leg, slide it inward toward the center of the piano up until it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and securing them. Location folded burlap pads over the furnishings More about the author pads however under the straps to supply extra defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for security against residence damage, place the keyboard end of the piano Get More Info towards the bottom of the stairs. Connect a bulge strap to the leading end of the piano board to prevent the piano from slipping.
16) To load the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The very best location to fill the padded lid is in between the piano and the preceding tier or between the piano and the wall.
Although grand pianos represent a considerable challenge, they can be moved without damage by utilizing sound judgment and practicing the procedures listed above.